Restoration phone support available around the clockCall (877) 775-0441

Homes and commercial properties

Florida

Industrial Water Damage Cleanup in Florida

Our quality-response team provides high-capacity water removal and drying for industrial facilities while accounting for equipment, safety zones, and production areas.

  • Restoration phone support around the clock
  • Residential and commercial loss response
  • Measured extraction, cleanup, and drying
  • One restoration team from assessment to dry standard

Call (877) 775-0441Browse services

Signs to look for

When to call us for industrial water cleanup

With documented progress, if you notice any of these problems, call us before water has more time to spread into nearby materials.

Water reached the base of production equipment or a control panel

To meet the completion standard, do not energize anything that has been wet, including for a quick test.

Water is standing in a floor pit, trench drain or sump

To meet the completion standard, pits collect the deepest water and often the dirtiest.

Raw material or packaging on the floor and bottom racks is wet

As our quality checks continue, bagged product, corrugated cases and fiber drums wick water upward fast.

Water entered an electrical room or motor control center

To meet the completion standard, that can take the whole facility offline, and the equipment inside is not ours to touch.

Bare concrete has gone dark and is staying dark

With documented progress, unsealed slab absorbs a surprising volume and gives it back slowly.

The water has contacted process chemicals or oils

From the first oversight check, water that mixed with process fluid is contained and handed to your environmental health and safety lead.

What happens

How we handle industrial water cleanup

Our quality-response team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.

Working inside your site safety program

To meet the completion standard, contractor orientation, sign in, escort requirements and required protective equipment.

Lockout tagout performed by your authorized personnel

To meet the completion standard, isolation of any equipment near our work is done by your authorized personnel under your program.

A hazard walk with your environmental health and safety lead

To meet the completion standard, we walk the affected area with your lead, agree the boundary, note chemical and process hazards, and confirm which zones are off limits.

Bulk water removal at plant scale

From the first oversight check, submersible pumps and truck mounted extraction clear open concrete quickly. To meet the completion standard, volume, not finish, is the constraint on most industrial floors.

Pits, trench drains and low points cleared

With documented progress, water hides below floor level and keeps humidity high.

Racking and raw material triage

To meet the completion standard, bottom rack stock, bagged material and packaging are sorted into usable, questionable and loss, then photographed and counted before anything leaves.

Talk with a restoration specialist

Water loss in Florida?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (877) 775-0441

What to expect

What to expect from our quality-response team

As our quality checks continue, here is how we usually handle industrial water cleanup near Florida.

  1. 1

    You call with the lines that are down

    With documented progress, which areas are affected, what equipment is involved, and your cost per production hour. To meet the completion standard, those answers size the crew and the shift plan.

    Your call
  2. 2

    Isolation, and the sentence we say every time

    With documented progress, your authorized personnel isolate the source and de energize affected areas under your own program.

    +5 minutes
  3. 3

    Your safety and access requirements collected

    From the first oversight check, orientation, permits, escort rules, protective equipment and any confined space requirements. With documented progress, paperwork runs in parallel with dispatch.

    +15 minutes
  4. 4

    Crew oriented and badged before entering the plant

    With documented progress, crews complete your orientation at the gate rather than negotiating at it. As our quality checks continue, crews are dispatched today or tonight depending on your shift pattern.

    Before we enter
  5. 5

    Hazard walk and zone boundaries agreed

    To meet the completion standard, we walk the area with your lead, mark the wet boundary, and agree which zones are released to us and which stay locked out.

    On arrival
  6. 6

    Bulk water off the floor and out of the pits

    To meet the completion standard, pumps and extraction clear open concrete first, then low points and trench drains under your permits.

    First hours on site
  7. 7

    Racking and raw material triaged the same shift

    To meet the completion standard, wet stock is sorted, photographed and counted with your materials team present. With documented progress, waiting a shift turns questionable material into confirmed loss.

    Same shift

Understanding the cost

What can affect the price

With documented progress, we explain the recommended work and price before you approve the job. With documented progress, these examples show what may change the estimate.

Common situationWhat the estimate may includeTypical range
Plant area up to about 10,000 square feet, bare or sealed concrete, clean waterAs our quality checks continue, national estimate. To meet the completion standard, includes pump out, extraction, pit clearing, drying and documentation, before any equipment work.$10,000 to $40,000
Production hall or several bays affectedAs our quality checks continue, national estimate. From the first oversight check, scales with congestion, air volume, material triage and how many zones need separate handback.$40,000 to $200,000
Industrial water removal and drying billed by affected area, open concreteAs our quality checks continue, national estimate.$3 to $8 per square foot
Racking and raw material triage with documented disposalAs our quality checks continue, national estimate for sorting, photographing, counting and removing wet stock.$5,000 to $30,000
Drying support around production equipment, our work plan onlyNational estimate for targeted airflow, humidity control and documentation around machinery. Electrical testing and equipment repair are your contractor's quality plan.$2,000 to $15,000
Desiccant dehumidification for a large open plant volume, per dayAs our quality checks continue, national estimate including temporary power arrangements. As our quality checks continue, single desiccant units and standard commercial dehumidification are priced far lower.$1,500 to $4,000
After hours dispatch on the first visitWith documented progress, national estimate for the after hours call out only.$100 to $400
  • Affected floor area and how open it is
    With documented progress, open concrete extracts and dries efficiently per square foot.

  • How much of it is concrete versus finished space
    From the first oversight check, bare and sealed slab has few porous finishes to remove, which keeps unit rates lower than finished commercial space.

  • Depth and how many pits and drains are involved
    To meet the completion standard, low points hold the deepest water and often need permit controlled entry. With documented progress, each pit adds setup, an attendant and time.

  • Volume of air to dehumidify
    To meet the completion standard, high bay space is a large air volume.

  • Equipment units multiplied by days
    From the first oversight check, air movers run roughly $25 to $40 per unit per day and Professional dehumidifiers roughly $70 to $110 per unit per day.

  • Raw material and racking triage volume
    From the first oversight check, sorting, photographing, counting and removing wet stock is labor.

Why timing matters

What can happen when the area stays wet

To meet the completion standard, water can keep moving into nearby materials even when the surface looks dry.

Downtime outgrows the cleanup invoice almost immediately

With documented progress, multiply your contribution per production hour by the hours a line is idle.

Energizing wet equipment destroys it and endangers people

With documented progress, water in a control panel or across motor windings invites arc flash and insulation failure.

Flash rust appears on machined surfaces within hours

With documented progress, bare steel, ways, tooling and unpainted castings corrode fast in a saturated space.

Corrosion inside panels shows up weeks after the water is gone

With documented progress, moisture that entered a variable frequency drive or a programmable logic controller enclosure keeps working on contacts and boards.

Helpful service information

What to know about industrial water cleanup

As our quality checks continue, start with the short explanation. To meet the completion standard, open a card if you want a little more detail.

What is happening inside the property

As our quality checks continue, work out your contribution per production hour, then multiply by the hours each affected line will be idle.

Read the explanation

From the first oversight check, the economics of an industrial water loss are unlike any other property type.

How the next step is decided

To meet the completion standard, equipment that has been wet does not get energized until a qualified electrician has evaluated it.

Read the explanation

As our quality checks continue, there is one rule on an industrial site that has no exceptions. To meet the completion standard, equipment that has been wet does not get energized until a qualified electrician has evaluated it.

What may change the work

With documented progress, bare steel, machined surfaces, tooling and unpainted castings develop flash rust within hours in a saturated space.

Read the explanation

With documented progress, materials in a plant fail in ways nobody expects. With documented progress, bare steel, machined surfaces, tooling and unpainted castings develop flash rust within hours in a saturated space.

Help near you

Industrial Water Damage Cleanup near Florida

Choose your area below, or call (877) 775-0441 and describe what happened.

Alachua, FLAlford, FLAltamonte Springs, FLAltha, FLAltoona, FLAlturas, FLAlva, FLAnna Maria, FLAnthony, FLApalachicola, FLApollo Beach, FLApopka, FLArcadia, FLArcher, FLArgyle, FLAripeka, FLAstatula, FLAstor, FLAtlantic Beach, FLAuburndale, FLAvon Park, FLBabson Park, FLBagdad, FLBaker, FLBalm, FLBarberville, FLBartow, FLBascom, FLBay Pines, FLBell, FLBelle Glade, FLBelleair Beach, FLBelleview, FLBeverly Hills, FLBig Pine Key, FLBlountstown, FLBoca Grande, FLBoca Raton, FLBokeelia, FLBonifay, FLBonita Springs, FLBostwick, FLBowling Green, FLBoynton Beach, FLBradenton, FLBradenton Beach, FLBradley, FLBrandon, FLBranford, FLBristol, FLBronson, FLBrooker, FLBrooksville, FLBryceville, FLBunnell, FLBushnell, FLCallahan, FLCampbellton, FLCanal Point, FLCandler, FLCantonment, FLCape Canaveral, FLCape Coral, FLCaptiva, FLCarrabelle, FLCaryville, FLCassadaga, FLCasselberry, FLCedar Key, FLCenter Hill, FLCentury, FLChattahoochee, FLChiefland, FLChipley, FLChokoloskee, FLChristmas, FLCitra, FLClarcona, FLClarksville, FLClearwater, FLClearwater Beach, FLClermont, FLClewiston, FLCocoa, FLCocoa Beach, FLCoconut Creek, FLColeman, FLCopeland, FLCoral Gables, FLCoral Springs, FLCortez, FLCottondale, FLCrawfordville, FLCrescent City, FLCrestview, FLCross City, FLCrystal Beach, FLCrystal River, FLCrystal Springs, FLCypress, FLDade City, FLDania, FLDavenport, FLDay, FLDaytona Beach, FLDe Leon Springs, FLDebary, FLDeerfield Beach, FLDefuniak Springs, FLDeland, FLDelray Beach, FLDeltona, FLDestin, FLDoctors Inlet, FLDover, FLDundee, FLDunedin, FLDunnellon, FLDurant, FLEagle Lake, FLEarleton, FLEast Palatka, FLEastlake Weir, FLEastpoint, FLEaton Park, FLEbro, FLEdgewater, FLEglin Afb, FLEl Jobean, FLElfers, FLElkton, FLEllenton, FLEnglewood, FLEstero, FLEustis, FLEverglades City, FLEvinston, FLFairfield, FLFelda, FLFellsmere, FLFernandina Beach, FLFerndale, FLFlagler Beach, FLFleming Island, FLFlorahome, FLFloral City, FLFort Lauderdale, FLFort Mc Coy, FLFort Meade, FLFort Myers, FLFort Myers Beach, FLFort Ogden, FLFort Pierce, FLFort Walton Beach, FLFort White, FLFountain, FLFreeport, FLFrostproof, FLFruitland Park, FLGainesville, FLGeneva, FLGeorgetown, FLGibsonton, FLGlen Saint Mary, FLGlenwood, FLGoldenrod, FLGonzalez, FLGoodland, FLGotha, FLGraceville, FLGraham, FLGrand Island, FLGrand Ridge, FLGrandin, FLGrant, FLGreen Cove Springs, FLGreenacres, FLGreensboro, FLGreenville, FLGreenwood, FLGretna, FLGroveland, FLGulf Breeze, FLGulf Hammock, FLHaines City, FLHallandale, FLHampton, FLHastings, FLHavana, FLHawthorne, FLHernando, FLHialeah, FLHigh Springs, FLHighland City, FLHilliard, FLHobe Sound, FLHolder, FLHoliday, FLHollister, FLHollywood, FLHolmes Beach, FLHolt, FLHomeland, FLHomestead, FLHomosassa, FLHomosassa Springs, FLHorseshoe Beach, FLHosford, FLHowey In The Hills, FLHudson, FLHurlburt Field, FLImmokalee, FLIndialantic, FLIndian Lake Estates, FLIndian Rocks Beach, FLIndiantown, FLInglis, FLIntercession City, FLInterlachen, FLInverness, FLIslamorada, FLIsland Grove, FLIstachatta, FLJacksonville, FLJacksonville Beach, FLJasper, FLJay, FLJennings, FLJensen Beach, FLJupiter, FLKathleen, FLKenansville, FLKey Biscayne, FLKey Colony Beach, FLKey Largo, FLKey West, FLKeystone Heights, FLKillarney, FLKissimmee, FLLa Crosse, FLLabelle, FLLacoochee, FLLady Lake, FLLake Alfred, FLLake Butler, FLLake City, FLLake Como, FLLake Geneva, FLLake Hamilton, FLLake Harbor, FLLake Helen, FLLake Mary, FLLake Monroe, FLLake Panasoffkee, FLLake Placid, FLLake Wales, FLLake Worth, FLLakeland, FLLakeshore, FLLamont, FLLanark Village, FLLand O Lakes, FLLargo, FLLaurel, FLLaurel Hill, FLLawtey, FLLecanto, FLLee, FLLeesburg, FLLehigh Acres, FLLithia, FLLive Oak, FLLloyd, FLLochloosa, FLLong Key, FLLongboat Key, FLLongwood, FLLorida, FLLoughman, FLLowell, FLLoxahatchee, FLLulu, FLLutz, FLLynn Haven, FLMacclenny, FLMadison, FLMaitland, FLMalabar, FLMalone, FLManasota, FLMango, FLMarathon, FLMarathon Shores, FLMarco Island, FLMargate, FLMarianna, FLMary Esther, FLMascotte, FLMayo, FLMc Alpin, FLMc David, FLMc Intosh, FLMelbourne, FLMelbourne Beach, FLMelrose, FLMerritt Island, FLMexico Beach, FLMiami, FLMiami Beach, FLMiami Gardens, FLMicanopy, FLMid Florida, FLMiddleburg, FLMidway, FLMilligan, FLMilton, FLMims, FLMinneola, FLMiramar Beach, FLMolino, FLMonticello, FLMontverde, FLMoore Haven, FLMorriston, FLMossy Head, FLMount Dora, FLMulberry, FLMurdock, FLMyakka City, FLNalcrest, FLNaples, FLNavarre, FLNeptune Beach, FLNew Port Richey, FLNew Smyrna Beach, FLNewberry, FLNiceville, FLNichols, FLNobleton, FLNocatee, FLNokomis, FLNoma, FLNorth Fort Myers, FLNorth Miami Beach, FLNorth Palm Beach, FLNorth Port, FLO Brien, FLOak Hill, FLOakland, FLOcala, FLOchopee, FLOcklawaha, FLOcoee, FLOdessa, FLOkahumpka, FLOkeechobee, FLOld Town, FLOldsmar, FLOlustee, FLOna, FLOneco, FLOpa Locka, FLOrange City, FLOrange Lake, FLOrange Park, FLOrange Springs, FLOrlando, FLOrmond Beach, FLOsprey, FLOsteen, FLOtter Creek, FLOviedo, FLOxford, FLOzona, FLPahokee, FLPaisley, FLPalatka, FLPalm Bay, FLPalm Beach, FLPalm Beach Gardens, FLPalm City, FLPalm Coast, FLPalm Harbor, FLPalmdale, FLPalmetto, FLPanacea, FLPanama City, FLPanama City Beach, FLParrish, FLPatrick Afb, FLPaxton, FLPembroke Pines, FLPenney Farms, FLPensacola, FLPerry, FLPierson, FLPineland, FLPinellas Park, FLPinetta, FLPlacida, FLPlant City, FLPlantation, FLPlymouth, FLPolk City, FLPomona Park, FLPompano Beach, FLPonce De Leon, FLPonte Vedra, FLPonte Vedra Beach, FLPort Charlotte, FLPort Orange, FLPort Richey, FLPort Saint Joe, FLPort Saint Lucie, FLPort Salerno, FLPunta Gorda, FLPutnam Hall, FLQuincy, FLRaiford, FLReddick, FLRiver Ranch, FLRiverview, FLRockledge, FLRoseland, FLRosemary Beach, FLRotonda West, FLRoyal Palm Beach, FLRuskin, FLSafety Harbor, FLSaint Augustine, FLSaint Cloud, FLSaint James City, FLSaint Johns, FLSaint Leo, FLSaint Marks, FLSaint Petersburg, FLSalem, FLSan Antonio, FLSan Mateo, FLSanderson, FLSanford, FLSanibel, FLSanta Rosa Beach, FLSarasota, FLSatellite Beach, FLSatsuma, FLScottsmoor, FLSebastian, FLSebring, FLSeffner, FLSeminole, FLSeville, FLShady Grove, FLShalimar, FLSharpes, FLSilver Springs, FLSneads, FLSopchoppy, FLSorrento, FLSouth Bay, FLSparr, FLSpring Hill, FLStarke, FLSteinhatchee, FLStuart, FLSumatra, FLSummerfield, FLSummerland Key, FLSumterville, FLSun City, FLSun City Center, FLSuwannee, FLSydney, FLTallahassee, FLTallevast, FLTampa, FLTangerine, FLTarpon Springs, FLTavares, FLTavernier, FLTelogia, FLTerra Ceia, FLThe Villages, FLThonotosassa, FLTitusville, FLTrenton, FLTrilby, FLUmatilla, FLValparaiso, FLValrico, FLVenice, FLVenus, FLVernon, FLVero Beach, FLWabasso, FLWacissa, FLWaldo, FLWauchula, FLWausau, FLWaverly, FLWebster, FLWeirsdale, FLWelaka, FLWellborn, FLWellington, FLWesley Chapel, FLWest Palm Beach, FLWestville, FLWewahitchka, FLWhite Springs, FLWildwood, FLWilliston, FLWimauma, FLWindermere, FLWinter Beach, FLWinter Garden, FLWinter Haven, FLWinter Park, FLWinter Springs, FLWoodville, FLWorthington Springs, FLYalaha, FLYankeetown, FLYoungstown, FLYulee, FLZellwood, FLZephyrhills, FLZolfo Springs, FL

You may also need

Related water-damage services

Common questions

Questions about industrial water cleanup

Can you dry our production equipment?

From the first oversight check, we dry the space, the slab and the structure around it, and we control humidity fast to limit corrosion.

Can we start a machine just to see if it still runs?

From the first oversight check, no. To meet the completion standard, energizing wet equipment risks arc flash, destroyed motor windings and permanent damage to drives and control boards.

How do you handle our site safety requirements?

With documented progress, we complete your contractor orientation, sign in, permits and escort requirements before crews enter. To meet the completion standard, lockout tagout is performed by your own authorized personnel, and we work only in zones your team has released to us.

How much does industrial water damage cleanup cost?

With documented progress, as national estimates, a plant area up to about 10,000 square feet of open concrete commonly runs $10,000 to $40,000.

How long until we can run production again?

As our quality checks continue, water removal is usually a matter of hours to a shift. From the first oversight check, drying concrete commonly takes 5 to 10 days, sometimes longer.

Why does concrete take so long to dry?

With documented progress, a slab absorbs water into its pore structure and releases it slowly from the surface.

Will our machined surfaces rust?

From the first oversight check, flash rust can start on bare steel and machined surfaces within hours in a saturated space.

Talk with a restoration specialist

Water loss in Florida?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (877) 775-0441

Areas we serve

Water-damage help near Florida

Our quality-response team quality-check homes, businesses, and managed properties throughout Florida and nearby communities.

View the area on Google Maps
Call (877) 775-0441